What is the use of servo voltage stabilizer?
You are here: Home » Knowledge » What is the use of servo voltage stabilizer?

What is the use of servo voltage stabilizer?

Views: 0     Author: Site Editor     Publish Time: 2022-06-04      Origin: Site

What is the use of servo voltage stabilizer?

servo stabilizers are a must-have appliance in many homes. If you don't know much about them, maybe this article will help you. Why do you need a voltage regulator at home? How to protect your electrical appliances from servo voltage stabilizer?



l Why do you need a servo voltage stabilizer at home?

l How does the voltage regulator protect your appliances?

l What are the main components of the servo stabilizer?


Why do you need a servo voltage stabilizer at home?

1. Any abnormality in the voltage to which your appliances are connected can cause serious damage. When using your equipment, it is important to stay within the safe operating range of the equipment. Any deviation from this range can lead to performance degradation, and the voltage regulator can help solve this

2. A voltage regulator is a surge suppressor that can make power smooth in the grid. This device prevents your equipment from being damaged by sudden spikes and sudden drops in current, thus saving money and protecting your equipment from excessive current.

3. Most fire hazards in India are caused by short circuits or equipment failures, which can even lead to death in extreme cases. Using a voltage regulator protects our homes and lives by reducing the chance of electrical failure.



How does the voltage regulator protect your appliances?

1. Regulators (often called automatic and safety voltage regulators) are static devices used to stabilize your utility voltage before feeding into connected equipment. It identifies voltage fluctuations in your utility and adjusts them internally to provide a consistent output voltage range when your utility voltage is low; Your stabilizer senses it, raises it to the required voltage level, and feeds it into the connected device to work properly. If high voltage is present in the utility line, vice versa.

2. The stabilizer accomplishes this by using an electronic circuit that, with the help of a high-quality electromagnetic relay, changes the taps required by the built-in automatic transformer to generate the desired voltage. If the voltage to be supplied is not in this range, a mechanism switches the required transformer taps so that the voltage supply is within the safe range.

3. Thus, the stabilizer acts as a safety barrier between your equipment and the utility by continuously monitoring and stabilizing voltage fluctuations that occur in the utility. It ensures that your valuable equipment receives a consistent stable voltage range as its input for trouble-free operation and long service life.



What are the main components of the servo stabilizer?

1. Dimmers (variable transformers) - usually round. The silicon CRGO ring core is used for base and copper wire, using a specific turn ratio depending on capacity. The basic purpose of a dimmer is to increase or decrease the voltage fed into the step-down step-up transformer. 50% of the output voltage is increased or decreased only by the dimmer.

2. Carbon brush - This is a moving part in the servo stabilizer. It is mounted on the shaft and is in contact with the dimmer. If the input voltage changes very frequently, this carbon brush will erase prematurely and the customer must replace it very frequently. This is why servo stabilizer manufacturers should use the best quality carbon brushes available.

3. Synchronizing Motors is the main component of the servo stabilizer. The motor turns the arm connected to the dimmer clockwise or counterclockwise according to the input voltage.

4. Step-down booster transformer - As opposed to a dimmer, it is rectangular. Bobin is equipped with EI CRGO core. When constructing transformer structures, dip them into varnish tanks to provide additional protection. This type of insulating paint, also known as transformer paint, is applied to all windings used in step-down and step-up transformers to encapsulate them before the servo stabilizer is ready for regression testing. Transformer varnish extends coil life and protects the windings in the transformer from environmental exposure that would otherwise be damaged by vibration. This varnish makes a good insulator for any coil. Although the isolation transformer also has a transformer, but it is different from the step-down transformer

5. The contactor's role is to cut off any servo stabilizer when its output exceeds a specified limit.

6. MCB is used to switch on and off servo stabilizers and provide short circuit protection, while MCCB is commonly used for overload protection.

7. Electronic circuits that send signals to various parts of the servo stabilizer, such as motors, dimmers, etc., so it works on that signal and corrects the voltage to the best of its ability.



Carefully selected and appropriate voltage regulators can protect all types of your appliances from critical voltage fluctuations. If you are looking for a supplier of servo voltage stabilizer with good quality and reasonable price, Zhejiang TTN Electric Co., Ltd. is a very good choice.



Contact us

Company Culture

Zhejiang TTN Electric Co., Ltd.  is a national high-tech enterprise, a national intellectual property advantage  enterprise. 

Get In Touch

 NO.28,Chuangda Road,Lucheng Light Industrial Zone,Wenzhou China 
 +86-577-86272111 / +86-17757752598
 jianbochen158
 17757752598
 +86-577-86272969
Copyright © 2021 Zhejiang TTN Electric Co., Ltd. Technical support : Leadong